11
INSTALLATION AND OPERATION MANUAL
4.3 User Menu N 1
User Menu N 1
Power
Pellet
The menu permits to modify the combustion power for Pellet Mode. The power can be set automatically or ma-
nually. In the first case the heater will automatically regulate the power. When the power is set manually, please
pay attention to choose the correct values without raising the pellet consumption. At the left part of the screen
will appear A = automatic combustion or M = manual set and the working power of the heater.
Heating
In this menu can be modified the power of room fan. In the automatic mode the speed is regulated automatically.
In the manual mode the user can regulate it. At the right part of the screen will appear A = automatic combustion
or M = manual set and the working power of the fan.
Thermo-
stats
Boiler
In this menu can be regulated the water temperature in the boiler. With the climatic function enabled the value
can’t be modified manually, it’s regulated by the heater according to the outside temperature.
Buffer tank
The menu is for setting the temperature in the buffer tank. The menu is seen only if the technician has choosen
the configuration of the heating system with the tank.
Domestic hot
water
The menu is for setting the temperature for domestic hot water.
Room
The menu is for setting the temperature in the room of installation. When the temperature set is reached (the
temperature is detected by a probe of the stove), the room fan goes on minimum.
Remote
The menu is for setting remotely the room thermostat.
Chrono
With the chrono is possible to program ignition and extinguishing of the boiler/thermostove.
Chrono
Mode
In this menu the user can choose the desired mode or disable chrono. Enable modification of
the menu by pressing the button 3
Choose th e mode (Daily, Weekly or Week-end)
Enable/disable the chrono mode with the button 2
Confirm the modification pressing the button 3
Disabled
Daily
Weekly
Week-end
