ITEM NO.: WC-18A AND WC-18B
ISSUED MAY 29, 2018
Printed in Vietnam
THIS ITEM IS PACKED IN TWO CARTONS
- 7 -
STEP 3
Attach aprons (G) to top (F) with screws (10) as shown below. Tighten with a screwdriver.
Attach side panels (H) to top (F) with bolts (3), and washers (7) and (5) as shown below. Tighten with
Allen key (15).
STEP 4
Attach x-frames (D) to top (A) with bolts (2), and washers (7) and (6) as shown below. Tighten with
Allen key (15).
Slide vertical panel (K) into the grooves of side panels (H), then attach crossbar (E) to x-frames (D)
with bolts (2), and washers (7) and (6) as shown below. Tighten with Allen key (15).
