background image

Millimeter Wave Radar

Millimeter Wave Radar

Content

1. Open-Package Inspection

2. Device Structure

2.1 Port Definition

2.2 Dimension

2.3 Radar Installation Direction

2.4 Installation Guide

2.5 Bootup Description

3. Device Wiring and Connection

3.1 Device Wiring

3.2 Device Connection

3.3 Strobe Siren Connection

3.4 Alarm Setting

3.5 Strobe Siren

4. FAQ&Solution

5. Maintenance Service

1

1

1

4

4

4

6

6

6

7

9

10

12

12

13

●                                 ●

                     ●

●   

iation or lighting.

● Pack the device with standard factory packaging or the equivalent mate

rial during the shipment.

Safeguards

● Make sure the antenna surface of radar is clean without any dirt.
● Do not dismantle the device because there is no component that can be

fixed by users themselves. Otherwise, it might cause water leakage or bad

performance due to unprofessional dismantling.

● Use the dry soft cloth to clean the device. If the dust is difficult to be

removed, please wipe it away with a clean cloth wetted slightly by the

mild detergent, and then use dry cloth to clean the device. Do not use

volatile solvents like alcohol, benzene, thinner, or abrasive detergent ,

which will damage the surface coating or reduce the working perfor-

mance of the device.

Warnings

● Use the standard provided by manufacturer and make sure the device is installed

and fixed by professional engineers.

● Do not provide two or more components (differ from the which provided

by manufacturer)for the device, otherwise it might damage the device.

Disclaimer

● This manual is for reference only. Please refer to the specified product

user manual for more details.

● All the software and user manual will be regularly updated according to the

product upgrade without prior announcement on the official website.

The company is not liable for any loss caused by the operation that does not comply

with the manual.

● If there is any uncertainty or controversy, please refer to our final explana-

tion.

Summary of Contents for SN-SMWR02A










Reviews: