User Manual of Network Camera
49
to
Step 3
Set the Alarm Actions for Motion Detection
in
Section 5.6.1.
5.
You can also choose the PTZ linking for the alarm input if your camera is installed
with a pan/tilt unit. Check the relative checkbox and select the No. to enable
Preset Calling, Patrol Calling or Pattern Calling.
6.
You can copy your settings to other alarm inputs.
7.
Click
to save the settings.
Figure 5-33
Linkage Method
5.6.4
Configuring Alarm Output
Steps:
1.
Enter the Alarm Output Settings interface:
Configuration>Advanced Configuration> Events > Alarm Output
2.
Select one alarm output channel in the
Alarm Output
drop-down list. You can
also set a name for the alarm output (optional).
3.
The
Delay
time can be set to
5sec,
10sec,
30sec,
1min,
2min,
5min, 10min
or
Manual
.
The delay time refers to the time duration that the alarm output remains in
effect after alarm occurs.
4.
Click
to enter the
Edit Schedule Time
interface. The time schedule
configuration is the same as the settings of the arming schedule for motion detection
Refer to
Step 2
Set the Arming Schedule for Motion Detection
in
Section 5.6.1.
5.
You can copy the settings to other alarm outputs.
6.
Click
to save the settings.
Summary of Contents for DS-2CD2012-I
Page 1: ...2 series Network Camera User Manual UD 6L0201D1158A02...
Page 75: ......
