User Manual of Network Camera
47
To trigger an alarm output when an event occurs, please refer to
Section 5.6.4
to
set the related parameters.
5.6.2
Configuring Tamper-proof Alarm
Purpose:
You can configure the camera to trigger the alarm when the lens is covered and take
alarm response action.
Steps:
1.
Enter the Tamper-proof Settings interface:
Configuration > Advanced Configuration > Events > Tamper-proof
Figure 5-31
Tamper-proof Alarm
2.
Check
Enable Tamper-proof
checkbox to enable the tamper-proof detection.
3.
Set the tamper-proof area; refer to
Step 1
Set the Motion Detection Area
in
Section 5.6.1.
4.
Click
to edit the arming schedule for tamper-proof. The arming
schedule configuration is the same as the setting of the arming schedule for motion
detection. Refer to
Step 2
Set the Arming Schedule for Motion Detection
in
Section
Summary of Contents for DS-2CD2012-I
Page 1: ...2 series Network Camera User Manual UD 6L0201D1158A02...
Page 75: ......
