Introduction:
Congratulations on the purchase of your new weld-in LED light for
STEEL/ALUMINUM
hulled vessels. Underwater Lights
®
USA,
LLC takes pride in providing well designed, high quality and thoroughly tested lights that allow you to “enhance your boating
experience”. These lights can be installed in your vessel for aesthetics, to attract fish and/or for security and safety.
General Information:
The latest commercial grade “COB” High-Density Light Emitting Diode (LED) technology used in this light will provide robust and
reliable operation under normal operating conditions when used with the matching Underwater Lights
®
USA, LLC driver box.
The main body is designed and tested to act as a cofferdam for added security.
Depending upon water clarity conditions, the light beam can reach up to 30 meters (100 feet).
Safety Information:
This light must be welded into a STEEL/ALUMINUM hulled vessel in accordance with common ship building practices.
Upon proper installation, this light will become part of the vessels grounding and cathodic protection system.
Always disconnect and lock-out power before working on light.
Care and Maintenance:
The light should be inspected for moisture every six months by removing the projector lid and inspecting internal components. This
can be accomplished while the vessel is in the water.
The lights electrical cabling and driver box should be visually inspected for proper operating condition every six months.
Marine growth should be removed from the glass using a soft brush to allow both heat and illumination to properly exit the light.
Technical Specifications:
Light source = Instant on high flux density LED array - 21,685 Lumens (Peak Axial Candela 11270) - 6500 Kelvin color temperature
- 40,000+ hours life
Glass = Borosilicate glass - 12.7mm (0.5”) thick - 58mm (2.3”) diameter net aperture
Light Common Body Dimensions = 150mm (5.9”) diameter x 166mm (6.5”) length
Smallest Front Flange Dimensions (STEEL) = 100mm (3.94”) diameter x 25mm (0.98”) length
Smallest Front Flange Dimensions (ALUMINUM) = 100mm (3.94”) diameter x 65mm (2.56”) length
Largest Front Flange Dimensions = 140mm (5.51”) diameter x 213mm (8.39”) length
Construction (STEEL) = 316L Stainless steel - Black anodized 5086 marine aluminum
Construction (ALUMINUM) = Bright dip anodized 5086 marine aluminum - Black anodized 5086 marine aluminum
Power supply = See matching Underwater Lights
®
USA, LLC driver box
Troubleshooting:
Please contact our Florida technical support staff at 1-954-760-4447 or French technical support staff at +33 (0) 497 21 0296,
Monday thru Friday from 8:00 am to 5:00 pm local time.
Warranty:
Underwater Lights
®
USA, LLC warrants this light to be free from defects in workmanship and materials for a period of two years
from the date of original purchase. Further, misuse, abuse, improper installation, neglect, improper shipping, damage caused by
disasters such as fire, flood and lightning, unauthorized repair or modifications will void said warranty. Should your light prove
defective during the warranty period, promptly contact Underwater Lights
®
USA, LLC for an RMA number and then return the light
freight prepaid with the RMA number clearly marked on the outside of the shipping container.
SV14 LED Light
Underwater Lights USA, LLC
Underwater Lights Europe Sarl
3406 S.W. 26
th
Terrace, C 6/7
16, rue Rouaze
Fort Lauderdale, FL 33312 USA
06400 Cannes, France
Phone: 1-954-760-4447
Phone: 33-(0)-4-97-21-02-96
Fax: 1-954-525-3261
Fax: 33-(0)-4-97-21-10-96
Internet: www.seavision.com
Internet: www.seavision.com
Email: [email protected]
DOC:022412-4
Email: [email protected]
STEEL/ALUMINUM
