70
=!
UL Ti MATE RANGE - 75 SA & 130 SA INFORMATION
BEAM ANGLE AND LUX INFORMATION
DESCRIPTION
The cone angle in the body restricts the width of the light beam angle. The 50 degree is 65 degrees,
while the flush and UL Ti MATE 130 have an angle of 100 degrees.
The centre of the light beam should be kept to 15 degrees down from the horizontal. Taking into
account the reflector adjustment, a flush body can be installed at an angle of 35 degrees to the vertical.
The spherical is then adjusted to 20 degrees and then locked.
This gives the required 15 degree beam angle.
BEAM ANGLE AND LUX INFORMATION
DESCRIPTION
The above pictures on the left show the directional adjustment. The centre pictures show how the lamp
is moved back to create a tight beam and the right hand pictures shows the lamp moved forward to
create a wide beam.
NOTE
- When the lamp is adjusted for a wide beam, the lux level at the centre will decrease but will
increase on the outer part of the beam, giving a more uniform light pattern.
underwater lights limited
™
Manufacturers of the Original
underwater lights ™
Brand Marine Lighting Products since 1991
[ +!
*
[ *
*
[ >
=@!
!!Y'><k&qj]w%$$j
Y
>
Y
@!
Y
!
