6. Troubleshooting
Symptom
Check-up
Troubleshooting
Wh
th
i
t
Please check if the battery of
UBC-100
Please charge your
UBC-100
with USB
When the power is not on…
has been charged before use.
power cable.
Please check if the Bluetooth mobile phone or
Bl
t th d i
t HFP(H d f
Please make sure Bluetooth function has been
enabled on the device and choose one
When the device is not compatible
with
UBC-100
…
Bluetooth device supports HFP(Hands-free
profile) or HSP(Headset profile) or both.
service(function/profile) like HFP or HSP to be
successfully paired.
Please check if
UBC-100
needs Please
charge
your
UBC-100
with
charging.
USB power cable.
Please ensure that the
UBC-100
has
been turned on.
Please press (MFB) button for 2~4
seconds and then the power will be on.
When
UBC-100
would not
pair with the device…
Please ensure
UBC-100
is being
under paring mode (see 3. How to Use
While
UBC-100
is powered off,
please press (MFB) button for 5 seconds
and then it will turn to paring mode with Blue &
[Pairing]).
p
g
Red LED light rapidly flash alternately.
When speaker sound is low…
Please check the speaker volume.
Please press (volume up ) button to
change the volume level.
g
When
UBC-100
would not
operate at all…
Please check if
UBC-100
does not
power on even after it has been fully charged.
Please
reset
UBC-100
.
(Reset: While button pressed down,
insert the USB power cable)
