5. Roaming
: Automatic or Home Only
6. Data Roaming:
Enable or Disable
7. Voice Readout
: Select from Keypad Digits, Contact List Entries, and Recent Call Entries.
8. USB Disk Mode:
Enables the transfer of data between a PC and the installed microSD card on the phone using a data
cable.
Display settings
1. Wallpaper
: Select a picture for the background image on the phone
2. LCD Backlight
: Select from 10s/20s/30s/Always On
Note:
the longer a backlight is on the faster the battery will drain.
3. Brightness
: You can select the brightness level of the LCD backlight by pressing the left and right navigation keys
4. Main Menu:
You can set the main menu as Icon or List mode
5. Themes:
Three themes can be selected.
Call settings
1. Answer Options:
Select Flip Open, Any Key and Send Only to answer a call
2. Call Duration Reminder
: Set the reminder to sound during calls at 45 seconds, 50 seconds, 55 seconds or off.
3. Call Connect Notification:
If this feature is Enabled a notification will be sent when connecting a call
4. DTMF Tones:
Select Long or Short;
5. TTY Mode
: Supports TTY Off, TTY Full, TTY VCO and TTY HCO
6. Auto Redial:
Select between Disable and Enable
Safety settings
To make changes in the Security menu, you must correctly input the phone password, the initial password is 0000.
1. Phone Lock:
If the phone lock is
Enabled
, it will prompt you to enter the correct password to use the phone when
powering the phone on
2. Keypad Lock:
The keypad lock can be set to be enabled at 5seconds, 30seconds, 60 seconds or 5 minutes or turned off.
Press the left soft key and then press the “*” key to unlock the keypad. Even when locked you may answer an
incoming call
3. Call History Lock
: If enabled the phone will require the password to be entered to access Call History;
4. Phonebook Lock:
If enabled the phone will required the password be entered to access Contacts
5. Message Lock:
If enabled the phone will require the password be entered to access messages.
6. Restrictions
: After entering the correct password of 0000, this function can be used for restricting incoming and outgoing
calls, incoming and outgoing text messages and incoming and outgoing picture messages and IP connections. It supports
three options: Allow All, Block All and Contacts Only;
7. Change Password
: After entering the current password, enter the new password, enter the same new password twice
and then press the left soft key or the Ok key to confirm. During the process, you can press the Right soft key,
Back,
to
cancel and return to the previous menu. You can change the Phone Password, Call History Password, Phonebook
Password, Message Password and Restriction Password
8. Restore Factory Settings
: This function is used for restoring the phone to its default factory settings.
Phone Info
1. Base Phone Information:
Displays the software and hardware information about the phone;
2. Icon Glossary
: Display all icons for the phone.
16
．
Profiles
The Profiles setting is used to customize the phone’s alerts and ringtones. To select and personalize the Profile settings, select the
