8
Hand Control — Memory Programming & Special Functions
Stop Control
Memory Positions
— Two programmable positions for storing commonly use table positions.
— Stops table movement when any impulse movements (HOME, Memory Function M1 or M2) are being
used. Pressing any button on the hand or foot control will cancel table movement.
Simultaneous movement
›
Press any combination of buttons for simultaneous movement of multiple functions
Simultaneous Movement
(shown as an example)
4040-650
4070-650
To Program:
1
Move table to desired position for memory storage.
2
Press and hold (approximately 3 seconds) desired memory position button (M1 or M2) in which table position is to be
stored. An audible double beep should be heard indicating table position has been programmed.
3
To use memory function, press and hold the memory button (M1 or M2) for 1 second. Table will return to programmed
position.
Holding the memory button (M1 or M2) for 3 seconds when performing step 3 will cause the memory button to re-program
to the current position of the table.
FEATURES AND OPERATION
