14
/ 21
You can modify the IP address, subnet mask, gateway, web port, transmission starting port,
remote host address and port, alarm host address and port, multicast addresses and ports, etc.can
also set up web service port, UPNP, PPPOE dial services start state, click "OK", then click on the
left "Save parameters" button and reboot the device, then take effect.
[DDNS]:
Click "DDNS" line, it will unfold the settings page, as shown below:
Select the Enable domain name, select DDNS provider, enter the application DDNS
username / password, domain name, DDNS server address and port, set the local mapping port
and update interval, click "OK." Enter the domain name in the IE address bar, if the normal
domain name to access the device indicates success.
[FTP Parameters]:
Click "FTP Parameters" line, it will unfold the settings page, as shown
below:
Start FTP upload, modify computer IP ftp host IP to start ftpserver service, click "OK"; After
starting ftpserver server, set the server IP and FTP directory and start the service, set the alarm
linkage for upload the alarm recording and snapshot to FTP and trigger alarm or start timed
capture uploaded to FTP, the pictures and videos will be uploaded to the computer specified
