UMAX Technologies visionbook 15WJ Plus, User Manual

Page: 14 / 82

| EN | 14 |
× REPLACING INTERNAL SSD STORAGE
You can replace the internal SSD drive (drive C: ) with a larger
capacity drive. The supported SSD drive is M.2 SATA SSD 2280 .
Important: The M.2 SSD must be a SATA type, NVMe is not
supported! The supported length of M.2 SSD is 2280 . This drive
(drive C:) has Windows system installed. If your replace this drive,
you need to install new Windows system.
2. Unscrew all screws on the back side of the laptop that you see
(total 10 screws).
3. Remove the HDD cover.
4. Unscrew the screw under the HDD cover (1 screw).
5. Remove the laptop back cover.
6. Insert the M.2 SATA SSD 2280 in the orientation shown on the
picture.
7. Screw the security screw to hold the SSD in place.
8. Place back the laptop back case and screw all screws.
| EN | 14 |