UMAX Technologies US20HRC, User Manual

Page: 4 / 102

| EN | 4 |
First use
To activate and turn on the scale for the first time, insert a pin
into the RESET hole next to the power connector.
Weighing without the application
After activating the scale, your scale is ready to use. Without
downloading the application, the scale can be used stand
alone as a regular digital weight scale.
Weighing procedure
1. Step onto the scale to turn it on.
CAL
appears on the display.
3. After 00 is displayed, step on the scale again.
4. Keep standing on the scale. The measurement is completed
after the measured value flashes twice.
5. The display shows the detected weight, BMI, body fat and
heart rate .
6. You can see other measured body parameters in the
application.
Use the scale only with dry feet and barefoot . Body
parameters cannot be measured over socks or with wet feet.