UMAX Technologies U-Box N51 Pro, User Manual

Page: 5 / 44

| EN | 5 |
× POWER SUPPLY
Connect the provided charger (12V 2.5A) to the power supply port.
Do not use other than the provided charger.
× REPLACING SSD STORAGE
You can change the pre-installed M.2 SATA SSD 2280 drive for a
larger capacity drive. If you replace the drive, you need to reinstall
Windows.
Important: The M.2 SSD must be a SATA type, NVMe is not
supported! The supported length of M.2 SATA SSD is 2280 .
× ADDING DDR4 MEMORY
You can add another memory module to increase the memory. The
memory module is DDR4 SO-DIMM . The miniPC has two DDR4 SO-
DIMM slots (memory is pre-installed in one slot and the second slot
is empty).
Important:
Maximum supported memory is
16 GB
. The maximum
supported memory frequency is 2933 MHz .
× USING VESA MOUNT
You can hang the miniPC on the back of a monitor using the
supplied VESA mount. Screw the VESA mount on the back of
your monitor. Then screw supplied screws on the bottom of the
miniPC and hang your miniPC on the VESA mount attached to your
monitor.