Ulvac SWU10-U, Instruction Manual

Page: 23 / 39

SK00-9662-EI-103-00
16
Download/install
1) Download
Please select "UL-MOBI for Windwos_v ●●● .zip" from our home page below and download
it. The zip file "UL-MOBI for Windows_v ●●● _ XXX " will be downloaded.
( ●●● is Ver.No., XXX is the uploaded date.)
UL-MOBI for Windows download site
https://www.ulvac.co.jp/download/en/application/?category=1009
2) Install
Unzip the downloaded zip file and run setup (.exe).
When the installation is completed, the UL-MOBI icon will be created on the
desktop.
3) Device driver installation
This product uses a USB control IC from FTDI in the United Kingdom. In case of Windows10,
the device driver is registered in Windows Update, and if it is connected to the network
environment, it will be installed automatically. UL-MOBI can be started if the device
driver is not installed, but Windows cannot recognize the connection even if the SWU10-
U is connected to the Windows device with a USB cable. (Unknown device is displayed in
the device manager.) If you need to install manually, please download the device driver
from the following FTDI home page.
FTDI Home page https://ftdichip.com/drivers/VCP-drivers/
Please install and use the driver in the line where the Operating System is "Windows
(Desktop)
*
" from the above website. You can easily install it by selecting "setup
executable" in the Comments column.
How to use
Start UL-MOBI and connect SWU10-U and Windows device with a USB cable. Click “CONNECT”
(5.3.3.1
⑬ ) at the top right of the UL-MOBI screen to connect the application and
SWU10-U, and the application can be used with “NORMAL” displayed in the STATUS column
(5.3.3.1
⑤ ).