Ulvac STC-1C Series, Instruction Manual

Page: 32 / 42

Super Trap Temperature Controller (STC-1Cseries) Instruction Manual
18 ULVAC CRYOGENICS INCORPORATED
9. Parameter setting
9.1. Procedure to Set Parameters
Key Description
Press UP key in the setting mode to increase the set value.
Press ENT key for one second to move the setting mode. and,used to fix the value
in the setting mode.
Press DN key in the setting mode to decrease the set value
◎
Parameter setting method
①
Press key for one second
②
Press key to select parameter to set
→
LED
：
The selected parameter LED flashes
CEL
：
The cell displays parameter (The cell flashes)
③
Press or key to change the setting value
④
Press key untill returning to the initial screen, then parameter setting mode is
completed.
R-T
→
READY
→
REF ON
→
REF OFF
→
Returning to the initial screen
◎
The function to inhibit the parameter setting(Key operation lock)
Press
and keys at the same time for 5 seconds to inhibit the parameter
change.
→
in 7 segment display, [on] will be displayed for two seconds.
Press and keys again at the same time for 5 seconds to unlock the function.
→
in 7 segment display, [oFF] will be displayed for 2 seconds.