Ulvac STC-1C Series, Instruction Manual

Page: 17 / 42

Super Trap Temperature Controller (STC-1Cseries) Instruction Manual
ULVAC CRYOGENICS INCORPORATED 3
3. Component Descriptions
3.1. STC-1C
Table 3-1 STC-1C Component Descriptions
Name Description
①
POWER The lamp lights up when powered ON.
② ７
-SEGMENT
DISPLAY
Normal Mode Displays the temperature of 80K panel.
Parameter Setting
Mode Displays the set value.
(Refer to section 9.1)
③
Status LED
・
R-T
The LED lamp lights up when contact outputs on the rear terminal board.
Refer to section 8 for operation and section 9.2 for factory default value.
・
HI-TEMP
・
READY
・
REF ON The LED lamp lights up when the refrigerator is ON.
・
REF OFF
The LED lamp lights up when the refrigerator is OFF.
(Note: The LED lamp doesn’t light when the compressor unit is
suspended.)
④
[UP]/[DN]
Used when change the parameter setting.
Refer to “parameter setting method” of section 9.1 for the details.
⑤
ENT
STC-1C
Ｋ
ＵＰ
ＤＮ
ＥＮＴ
ＰＯＷＥＲ
REF OFF
REF ON
READY
R-T
HI-TEMP
１ ２
３
４ ５
U LV AC C RY OG EN IC S