Ulvac G-TRAN SW100-A, Instruction Manual

Page: 43 / 75

SK00-9663-EI-003-00
43
11. How to use UL-MOBI
This chapter describes the dedicated application "UL-MOBI".
The SW100 series can be connected to a Windows/Android device with UL-MOBI installed
that can be downloaded from the following site using a USB cable, and various settings
and status can be checked on the Windows/Android device.
※ Windows/Android device and USB cables are not included.
【 UL-MOBI download site 】
・ UL-MOBI for Windows (Supported OS: Windows10 or later, 64bit)
HP address
https://www.ulvac.co.jp/download/en/application/?category=1009
* CAUTION *
Device driver
A device driver is required to use UL-MOBI for Windows. UL-MOBI
can be started if the device driver is not installed, but Windows
cannot recognize the connection even if the SW100 is connected to
the Windows device with a USB cable. (It will be displayed as an
unknown device in the device manager.) Please check this manual,
Section 11.2.2 3) and install it if necessary.
・ UL-MOBI for Andoroid (Supported OS: Android6.0 or later)
Google Play Search by “UL-MOBI”
or read the QR code on the right to install.
HP address
https://www.ulvac.co.jp/download/en/application/?category=1009
11.1.
Function
The following functions can be used by connecting SW100 and UL-MOBI.
Function Contents SW100-A SW100-R
DATA
Pressure value and graph
display.
□ □
DATA LOGGING Data logger of pressure value 〇 〇
SAMPLING
Check/change the sampling cycle
※ Cannot be changed when data
logging is executed.
〇 〇
PRESSURE UNIT
Check/change pressure unit
※ Only compatible with UL-MOBI
display..
〇 〇
ZERO/ATM POINT ADJUST
Perform zero point adjustment/
atmospheric pressure adjustment
■ －
ADJUST CLEAR
Clear execution of zero point
adjustment and atmospheric
pressure adjustment.
■ －
SETPOINT1/2 Confirmation/change setpoint. ● △
OUTPUT Check/change compatibility. ▲ －
ADDRESS Confirmation/change address. － △