SK00-9663-EI-003-00
45
Download/install
1)
Download
Please select "UL-MOBI for Windwos_v
●●●
.zip" from our home page below and download
it. The zip file "UL-MOBI for Windows_v
●●●
_ ×××" will be downloaded.
(
●●●
is Ver.No., XXX is the uploaded date.)
UL-MOBI for Windows download site
https://www.ulvac.co.jp/download/en/application/?category=1009
2)
Install
Unzip the downloaded zip file and run setup (.exe).
When the installation is completed, the UL-MOBI icon will be created on the
desktop.
3)
Device driver installation
This product uses a USB control IC from FTDI in the United Kingdom. In case of Windows10,
the device driver is registered in Windows Update, and if it is connected to the network
environment, it will be installed automatically. UL-MOBI can be started if the device
driver is not installed, but Windows cannot recognize the connection even if the SW100
is connected to the Windows terminal with a USB cable. (Unknown device is displayed in
the device manager.) If you need to install manually, please download the device driver
from the following FTDI home page.
FTDI Home page
https://ftdichip.com/drivers/VCP-drivers/
Please install the driver in the " Windows (Desktop)
*
" line of the Operating System
column from the above home page. You can easily install it by selecting "setup
executable" in the Comments column.
How to use
Start UL-MOBI and connect SW100 and Windows terminal with a USB cable. Click “CONNECT”
(11.2.3.2
⑬
) at the top right of the UL-MOBI screen to connect the application and
SW100, and the application can be used with “NORMAL” displayed in the STATUS column
(11.2.3.2
⑤
).
Password
UL-MOBI has a password for changing the settings because there is a possibility that
the vacuum equipment may be damaged due to careless setting changes. The password is a
4-digit number, and the factory default "0000" is registered in the SW100 main unit.
Change it if necessary. For details on how to change the password, refer to Section
11.2.3.4
㊳
of this manual.
Please be careful when managing the password after the change.
When password input is required, the password input screen is displayed on the POP UP
screen.
Summary of Contents for G-TRAN SW100-A
