SK00-9663-EI-003-00
49
㉖
Logging start/stop
button
Start/stop logging.
At the start of logging, the graph displayed in the
graph display area (
⑧
) will be erased and will start
from 00:00.
However, when 24V is not energized, the pressure value
recorded on the CSV file will be “F.FFE+F”.
For SW100-R, if there is no command input even when 24V
is not energized, CSV files will not created or
recorded.
SETTING tab
㉗
SETPOINT1 ON/OFF
button
The value of setpoint1 is displayed in the graph area
(
⑧
)
㉙
SETPOINT2 ON/OFF
buttun
The value of setpoint2 is displayed in the graph area
(
⑧
)
㉚
SETPOINT2 setting
Set the value of setpoint2.
It can be set at all times, but a password is required
when 24V is energized.
The set value is saved in the SW100.
㉛
OUTPUT selection
Select output. Refer to Chapter 9 for details.
The settings are saved in the SW100.
It can be selected by password input only when SW100-A
is connected and 24V is not energized. SW100-R is not
supported and cannot be selected.
㉜
㉝
ADDRESS setting
Set address.
Enter the adrress (00-99: half-width number) you want to
set in the input location (
㉜
), and click the "SET"
button (
㉝
) on the right side to confirm.
The setting result is saved in the SW100.
It can be selected only when SW100-R is connected and
when 24V is not energized.
㉗
㉘
㉙
㉚
㉛
㉜
㉞
㉟
㊱
㊲
㊳
㉝
Summary of Contents for G-TRAN SW100-A
