Ulvac EXO-13 Instruction Manual Download Page 17 | Manualshive

Page: 17 / 21

Ulvac EXO-13 Instruction Manual Download Page 17

EXTERNAL OSCILLATOR FOR RF POWER SUPPLY EXO-13

3．PREPARATION

7

３.４.

INSTALLATION AND CONNECTING INPUT AND OUTPUT CABLES

Install this unit according to the following procedure.

CAUTION

This product does not accept lightning surge, spike voltage and moment power failure. If lightning
surge, spike voltage or moment power failure are input, damage or error are led. Operate it without
lightning surge, spike voltage and moment power failure.

３.４.１.

How to install

Place this unit on the flat and fix it. Refer to Fig. 3.2 as for the fixing screw positions.

３.４.２.

Clearance

The main body has natural air cooling system through the side slit. Provide a clearance around the
product. When using rack etc, enable to ventilate enough in order that the temperature in a rack will
not exceed specification temperature. If it is operated at the temperature besides specification, it
may be damaged in the worst. Refer to "Fig. 3.2 Mounting main body and clearance"

clearance

2mm or more

Fixing screw

4 positions

Fig. 3.2 Mounting main body and clearance

«
...
15
16
17
18
19
...
»

Summary of Contents for EXO-13






















Reviews:

No comments