EXTERNAL OSCILLATOR FOR RF POWER SUPPLY EXO-13
2．GENERAL DESCRIPTION
4
２.４.
SPECIFICATION
Item
EXTERNAL OSCILLATOR UNIT
Input
Input voltage
DC 9V/10Ｖ/12V/15Ｖ/24V
Input variable range
DC 8 to 32Ｖ
Input capacity
1VA or less
Input connector
D1200D four pole connector Xkey type （Made by TYCO/AMP）
DC jack 2.1mm(inside diameter)/5.5mm(outside diameter)
（core：＋polarity /outside：－polarity）
Oscillation system
Quartz crystal oscillation
Oscillation frequency
13.56MHz ± 0.05％
Output
Output impedance
50Ω
Output wave form
Sine wave
Rated output
10mW to 100mW
10mW or more per output and 100mW or less for 4 outputs total.
Number of connected
power supplies
1 to 4
Output connector
BNC
Cooling system
natural air cooling
Protective function
Input steps fuse for internal damage progress prevention
Diode for input polarity reverse-connection protection
Environ-
ment
Ambient temperature
+5 to 40℃
Ambient humidity
35 to 80％ (not condensing)
Storage temperature
-5 to 50℃
Outside dimensions
145W×110D×44H （Including main body installation part）
Weight
500g
２.５.
OUTPUT POWER AND ADAPTABLE POWER SUPPLY
This unit internally divides output (total power) that is adjusted to 100mW or less into four outputs equally.
The output power from each port depends on the number of connected power supplies.
However, it is adjusted that the power of 10mW or more outputs from each output port when the maximum
four power supplies are connected.
output of each port
＝
connected power supplies number
total output
（
adjusted to 100mW or less
）
＞
10
ｍ
W
The specifications of the external input terminal for adaptable power supplies are as follows:
1)
50Ω terminal
・To operate when input oscillation signal is from 10mW to 100mW