U-Series Operating Manual
4
C6000610
General use
Do not place fingers, hands, or other parts of the body in the liquid in the bath
when it is sonicating.
Always ensure the liquid is above the tank crease when in operation (page 7).
Do not place parts or containers directly on the bottom of the cleaning tank.
Always use a basket or instrument cassette to support items to be cleaned. Not
doing so may damage the bath and invalidate your warranty.
Never use toxic, flammable, acidic, caustic, or corrosive solutions in the bath.
Do not move the bath when it is full of water.
Before cleaning, drain the bath. Clean by wiping with a clean non-abrasive cloth.
The user should familiarize themselves with this user manual before operating
the equipment. Safety may be impaired if they are not followed.
Ultrawave will not be responsible for damage or injury caused by incorrect use
of the equipment.
The user should apply to Ultrawave or its agent for advice on cleaning techniques
or detergents.
IMPORTANT: Once the cleaning cycle has finished, remove the cleaned items,
and rinse them immediately in clean running water.
REMEMBER
Always ensure the liquid is at or above the crease in the tank when in operation.
Do not put hot water above 50°C into the bath.
Always use the basket to support items in the bath.
Never expose hands, fingers or other body parts to cleaning solutions.
Never use toxic, flammable, acidic, caustic or corrosive solutions.
Never breathe the fumes from strong solutions.
Rinse the items in clean water once the cycle is complete.
Subjecting the bath to improper treatment or misuse will invalidate the warranty.
