Page
12
of
41
Connecting to Services
Connecting the Drain Assembly
1.
Screw the hose connector into the drain valve at the rear of the hygea d3ntal.
2.
Locate the hygea d3ntal close to a drain or sink and within easy reach of a standard
earthed electrical outlet. Do not place on a circuit which could become overloaded.
3.
Connect one end of the drain hose to the hose connector and locate the other end over
a drain or sink. Shorten hose if required.
4.
Connect the power cord into a suitable outlet.
5.
Ensure that the power plug and the switch are accessible.
6.
Make sure the drain valve is closed.
Connecting the Power Cord
1.
Plug the power cord into the main power connection located on the back of your unit
2.
Ensure your hygea d3ntal ultrasonic cleaner is plugged into a 230 VAC fully earthed
outlet.
