www.ultratecfx.com
6
DMX Operation
The Stage Fogger DMX comes equipped with onboard DMX Control as a standard feature
1. Plug in the 5 pin DMX cable into the DMX IN connector located on the rear of the Stage Fogger DMX. A
terminator may be required if the DMX OUT is not used.
2. Select the DMX address assigned to the Stage Fogger DMX by using the DMX ADDRESS thumbwheel selector
located on the rear of the Stage Fogger DMX. If a valid DMX signal is availble then the Stage Fogger DMX
ignores the settings on the standard remote.
3. Fog output is varied by the DMX signal. 0% is off and 1% - 100% is fog intensity.
4. 15 Amp chassis fuse on the back of the machine.
Maintenance
Exterior:
The casing of the Stage Fogger DMX is steel with a powder paint coating. To clean, simply wash with mild soap
and warm water.
Heat Exchanger:
The use of high quality Ultratec Special Effects fluid should result in a long heat exchanger life. (See warranty
policy later in this manual.)
Note: Cleaning/Rapid Change procedure can be found on the Stage Fogger DMX product page on
www.ultratecfx.com
Recommended Fluids
Director’s Choice Fog Fluid:
The choice of professionals. Director’s Choice creates a cloud of fog with a medium
hang time while remaining clean, white, dry, and odorless.
Pro Beam Long Lasting Fog Fluid:
With a hang time 2-3x greater than the Director’s Choice Fog Fluid, the Pro
Beam solution produces a slightly less white fog while remaining clean, dry, and odorless.
Quick Dissipating Fog Fluid:
This fast dissipating fluid is great for applications or effects that require quick
dissipation of fog. It produces excellent steam effects that resemble nitrogen bursts and it also keeps low-lying fog
from rising too quickly when it is used with the LSG or LSX.
Extra Quick Dissipating Fog Fluid:
Dissipates 2x the rate of Quick Dissipating Fog Fluid while maintaing similar
characteristics.
Molecular Fog Fluid:
A faster dissipation versus the Director’s Choice Fog Fluid. This thick, clean, white fog is an
optimal solution for a dense low-lying fog effect when chilled with the LSG or LSX machines.
Maxi Fog Fluid:
The perfect balance between price and performance. Maxi Fog is the ideal solution for those
who require high volume without compromise.
EZ Kleen Preventative Maintenance Fluid:
Using EZ Kleen preventative maintenance fluid on a regular basis
ensures longer life for the heat exchanger in Ultratec fog machines by reducing blockage.
NOTE: All of our fog fluids are water based. Damage will occur if Haze Fluid is used in the Stage Fogger
DMX.
