1 0 • S E T – U P
About the printer
The printer is on when you turn on your Miniprint 225 for the
first time. Press the print key (
+
) to turn the printer off.
The display says PRINTER OFF. Press the print key again to
turn the printer back on. You can turn the printer on or off at
any time, including during a call.
The printer starts a new line after 24 characters are typed. If a
word is too long to fit at the end of a line, the printer divides it
with a dash. You can also start a new line yourself by pressing
the
key. Often a few characters will not be printed at the
end of a conversation unless you press the
key before you
turn off the machine.
Setting the print case
The Miniprint 225 prints everything you type in lowercase
(small) letters and everything the other person types in
uppercase (CAPITAL) letters. You can also set the Miniprint
225 so that everything is printed in uppercase letters. Follow
these steps to change the print case:
1.
Press the options key (
+
). The display says PRINT
(UP/LOW) CASE.
2.
Press the
to change the setting to UPPER.
3.
Press the key to
save the setting and leave the options.
This option stays changed until you change it again or
completely reset the Miniprint 225.
Setting the print size
Your Miniprint 225 is set to print 24 characters on each line
(normal). You can change this setting and print 19 characters
(bold) or 14 characters (wide) per line. Follow these steps to
change the print size:
Esc
Spacebar
3
Ctrl
Return
Return
2
Ctrl
Summary of Contents for Miniprint 225
Page 11: ...S E T U P 9...
