Ultrasonix SonixTouch Q+, Service Manual

Page: 19 / 148

SonixTouch Q+ Service Manual 00.053.204, Revision A Chapter 3: System Installation
3-5
3.2 PRE-INSTALLATION
3.2.1 Preliminary Inspection
During preliminary inspection, ensure the system crate was not tipped too far during transport and delivery.
Figure 3-1: Tip’n Tell Acceptable Unacceptable
To Inspect the Shipping Crate and Box Upon Arrival:
1. Examine the shipping container for any damage that may have occurred during transport.
2.
Look for evidence to ensure that the crate has not been opened.
3.
Examine the " Tip’n Tell " attachment on the outside of the package to ensure the crate has not been tipped too
far during transport and delivery (refer to Figure 3-1 for details).
4. Report any damage to both the carrier and Ultrasonix.
3.2.2 Unpacking Instructions
Equipment/Tools/Personnel Required:
• scissors or utility knife
• two people (recommended).
Note: Before unpacking the system, ensure there is adequate room for removing it from its packaging. The
space should be at least equivalent to the crate's overall dimensions.