UltraPlus F-9000HD PVR, User Manual

Page: 15 / 68

15
5. Multi-Brand IR Remote Controller Setting
NOTE : If there is no input during the first 10 seconds of set mode, set mode is
canceled.
1. Direct Code Entry
Step 1 : Turn on the DEVICE what you want to set up(TV / DVD / VCR)
Step 2
: Press DEVICE and OK buttons for about 2 seconds simultaneously.

The DEVICE LED will blink twice.
Step 3
: Input the 3 digit code number for your device.
(Refer to ‘Code Table for Universal Remote Control Unit’ )

The DEVICE LED will blink twice and the DEVICE turns off.

If you enter wrong DEVICE code, DEVICE will blink once
Step 4
: If your DEVICE turns off, press OK button.

The DEVICE LED will blink twice.
2. Auto Code Search
Step 1
: Turn on the DEVICE what you want to set up(TV, DVD)
Step 2 : Press DEVICE and OK buttons for about 2 seconds simultaneously.

The DEVICE LED will blink twice.
Step 3
: Press the UP or Down button to enter the Search mode.
Step 4 : Press the UP or Down button until the DEVICE turns off.
Step 5
: If your DEVICE turns off, press OK button.

The DEVICE LED will blink twice.
3. Code No. Checking (Number Call)
Step 1 : Press DEVICE and OK buttons for about 2 seconds simultaneously.

The DEVICE LED will blink twice.
Step 2 : Press INFO button within 3 seconds.

The LED will blink according to mode number the remote is set to.
(In the case of digit '0', it blinks 10 times.)