background image

8

WARRANT Y DETAILS

UltraPlay warrants its products to be free from defects in materials and/or workmanship, subject to normal usage and installation, for 
a period of 1-year from the date of shipment to the original purchaser. In the event of a claim under this warranty, UltraPlay will replace 
the component at no cost within the first 12 months from date of shipment to the original customer. Equipment not specifically 
addressed in the following paragraphs is also subject to this limited 1 year warranty against defects in materials and/or workmanship.

TEN-YEAR LIMITED WARRANTY ON UPRIGHT POSTS, CAPS, AND HARDWARE
UltraPlay provides a limited warranty on Discovery Centers metal upright posts, caps, and hardware to be free from defects in materials 
or workmanship against structural failure which causes the product to become unfit for its intended use, subject to normal usage and 
installation, for a period of 10 years from the date of shipment to the original customer.

FIVE-YEAR LIMITED WARRANTY ON ROTOMOLDED AND BLOWMOLDED PLASTIC COMPONENTS
UltraPlay provides a limited warranty on rotomolded and blowmolded plastic components such as the following plastic parts: slides, 
climbers, roofs, panels. These components are warranted to be free from defects in materials or workmanship, subject to normal 
usage and installation, for a period of 5 years from the date of shipment to the original customer.

FIVE-YEAR LIMITED WARRANTY ON GROUND-MOUNT METAL PARTS
UltraPlay Systems provides a limited warranty on metal footers, inground footers, surface mount plates, ground spikes, slide and 
climber mounting posts and plates to be free from defects in materials or workmanship against structural failure which causes the 
product to become unfit for its intended use, subject to normal usage and installation, for a period of 5 years from the date of 
shipment to the original customer.

ONE-YEAR LIMITED WARRANTY ON COMPONENTS WITH MOVING PARTS
UltraPlay Systems provides a limited warranty on components with moving parts, freestanding components such as spring riders and 
swings, and all other components not specifically named above to be free from defects in materials or workmanship against structural 
failure which causes the product to become unfit for its intended use, subject to normal usage and installation, for a period of 1 year 
from the date of shipment to the original customer.

LIMITED WARRANTY ON SITE FURNISHINGS
UltraPlay provides a five-year limited warranty on the finish of thermoplastic coated site furnishings from the date of shipment to the 
original customer. Additionally, all site furnishings are guaranteed to be free from defects in materials or workmanship for one-year 
from the date of shipment to the original customer. 

All warranties specifically exclude damage caused by man-made or natural disasters, vandalism, negligence, improper installation or 
improper use, modification, changes in appearance resulting from weathering, scratches, dents, discoloration, normal wear and tear, 
or marring as a result of public or private use. Claims are limited to replacement of equipment only and do not include any costs 
associated with labor, removal or installation of the original or replacement product. Warranties are valid only if products are installed 
and maintained in accordance with UltraPlay installation instructions and use of approved parts. This warranty is applicable to the 
original owner only. Warranties are non-transferable.

Summary of Contents for Discovery Centers DC-2MDR

















































































Reviews: