Step 11
Strobe mount to arm.
Strobe mount to arm.
Strobe mount to arm.
Strobe mount to arm. Position Strobe head on top of arm and tighten hold-down screw so that strobe is
at desired angle.
The UXDS-1 Strobe has two pick-up sensors. When either detects a sudden flash the Strobe fires
instantaneously. For this reason the sensor should be aligned so that it is slightly forward of the camera
flash when adjusting the arm configuration for picture taking.
Specifications:-
•
Guide No. 20
•
Coverage Angle : 60 degree
•
Color Temperature: 5700 K
•
Batteries (not included): 4AA Alkaline Battery ; Cycle Time: Approx 7~8 seconds
•
Rated Depth: 55M (183 Feet)
•
No. of Pre-Flash Settings : 5
•
No. of Power Output Level Settings: 4 ( 10% > 25% > 50% > 100% )
○
c 2010 ULTRAMAX Enterprises Inc.
www.ultramaxincorp.com
