3-3 Brushless DC rotary tools
1) Please turn off the power
before using the Brushless DC
rotary hand-piece.
2) Connect the hand-piece to the jack
on the main unit, and
install the proper polishing tool.
3) Turn on the power of the main unit, and the main unit will
enter to last user's mode. Please press the button
function
and output switch to Brushless DC rotary mode.
4) Adjust to the required speed by knob .
5) When the tool is rotating, the Load indicator
will indicate
the tool loading. To protect your hand piece please do not
operate over the red light level.
6) When using foot switch, keep depressing it to produce
output.
7) To change between forward and reverse rotations, it is
possible to press on the Forward/reverse selector button
during use.
8) Please turn off the power before changing tools, to avoid
accidents.
9) In case of abnormal use or overload, the overload protection
will cut off the output and the function indicators lamp will
blink. Please turn the power switch off and on again to
restart.
10) If there is a machine failure, do not attempt to disassemble
the unit. Please contact your supplier for repair.
①
②
③
④
⑤
⑥
FFiinniisshheerr
K-rp m
BLDC
DC
Rota tion
POWER
33nn11
ULTR.
1
2
3
4
5 6
7
8
9
10
LO A D
①
②
③
④
⑤
⑥
-5-
3-2 DC rotary tools
1) The 3N1 power pac is intended for D.C30V micro motor hand
pieces.
2) Please turn off the power before using the rotary tools.
3) Connect the rotary tool to the jack
on the main uni , and
install the proper polishing tool.
4) Turn on the power of the main unit , and the main unit will
enter the last user's mode. Please press the Function selector
button to switch to DC rotary mode.
5) Push
DC rotary function and output button
then the
DC rotary hand-piece will start running. Adjust to the
required speed.
6) When the tool is rotating, the load indicator
starts
functioning, keep load below the red LED level.
7) When using the foot control keep depressed to maintain
rotation.
8) Change in rotation is actioned by depressing the
forward/reverse selector button .
9) Switch the function off to change tools.
10) In the case of abnormal load. The overload function will
stop and the overload light will indicate, in which case the
power switch should be switched off and on again to
recommence operation.
11) When there is a machine failure, do not attempt to
disassemble the unit. Please contact your supplier for repair.
①
②
③
④
⑤
t
the
FFiinniisshheerr
K-rp m
BLDC
DC
Rota tion
POWER
33nn11
ULTR.
1
2
3
4
5 6
7
8
9
10
LO A D
①
②
③
④
⑤
-4-
