10
w
w
w
.ul
tral
u
x.bg
UPLOADING A PROGRAM
First, select the floodlight that is going to be leading (MASTER) and have its program prepared in the
EDIT menu beforehand. After that, connect all the floodlights with DMX cables, choose UPLOAD from the menu
of the MASTER floodlight and press ENTER. Its program would be transferred to all the floodlights in SLAVE
mode.
CONNECTING
The connection must be executed with XLR connectors on both ends (male and female).
WARNING:
Do not connect the grid’s ground
with the ground of the floodlight. This would cause the luminaire to
operate erratically. Test the polarity of the cables with an Ohm-meter.
3-pin to 5-pin conversion
When using a 5-pin connector you must also use an adapter. The chart below shows the correct way of
connecting the cables:
Conductor
3 Pin Female
(output)
5 Pin Male
(Input)
Ground/Shiel
d
Pin 1
Pin 1
Data ( - )
signal
Pin 2
Pin 2
Data ( + )
signal
Pin 3
Pin 3
Do not use
Do not use
Do not use
Do not use
Summary of Contents for SPX22048
Page 12: ...12 www ultralux bg...
