6
PRE-INSTALLATION
MERCURY SLIM
•
NEVER disconnect the spool cables:
Doing so will cause the tension of each cable to become uneven/unbalanced, making the load
applied to the lifting mechanism uneven. This can cause the Mercury Lift to malfunction and may
cause the cables to snap.
Preparation:
1. Prepare the ceiling cut-out according to the Ceiling Cut-out sizes (CW and CD) in the Specifications of your
lift.
2. Frame up the ceiling joists or hanger rails using a qualified trades person.
3. Route the Audio-Visual cables to the lift position in the ceiling.
4. A double power point is required in the ceiling to power the Mercury Slim and the display
panel.
Note
•
Access to the power point in the ceiling is advisable
