518854-2960-D
6
KDMU040013
7/20/01
5.
Clean the camera lens (only if required). Ultrak recommends purchasing an optical lens
cleaning kit and following the procedures provided with the kit.
Do not use facial tissues,
paper toweling, or clothing to clean the lens.
Use only a lens cleaning tissue
.
Clear Dome and Smoked Dome Cleaning Procedure:
The inside and outside surface of the dome can be cleaned with any non-abrasive cleaning cloth
and cleaning agent that is safe for use on acrylic plastic such as Windex, Glass Plus, or lens
cleaner. To polish the dome, Meguiar’s Mirror Glaze 6 Professional Cleaner/Wax or equivalent
mirror cleaner/wax is recommended.
8.0
REPLACEMENT PARTS
The following drawings and partial material lists are provided to assist in installing and servicing
the KD6 Z-Series Dome. All servicing must be performed by qualified technicians who have
attended an Ultrak training course.
8.1
REPLACING THE CAMERA
Perform the following procedures to replace the camera.
1.
Remove power to the pan and tilt.
2.
Remove the existing camera.
3.
Install the replacement camera.
4.
Power up the unit to activate camera.
5.
Power down the unit to reset the camera’s baud rate. The unit automatically resets the baud
rate.
6.
Power up unit.
