8
3.2
BASIC
INSTALLATION,
continued
•
Welder’s
glass
•
Tools
2.
Select a suitable location for the camera.
IMPORTANT:
Contact your authorized
Ultrak dealer/distributor to purchase
longer cables.
3.
After selecting a location for the camera, use a
suitable fastener and necessary tools to mount the
camera stand to a structural object that can support
the weight of the camera and mount, such as a wall
stud, shelf, ceiling rafter, etc. The maximum
recommended load rating for the bracket is 11
pounds.
4.
The KC4500MN/KC6500MN observation camera
has a ¼"-20 UNC mounting hole located at the top
and the bottom of the camera housing to allow for
bottom or top mounting. Mount the camera on the
stand (not included) by threading the camera onto
the threaded mounting bolt.
IMPORTANT:
Do not aim or point the
camera towards the sun or into a strong
light.
5.
Install the lens. If a C- or CS-mount lens is used,
adjust the back focal length or picture focus. For C-
mount lenses, rotate the focus adjust ring
counterclockwise. For CS-mount lenses, rotate the
focus adjust ring clockwise.
6.
If an auto-iris lens is used, connect the cable to the
mini-DIN connector supplied with the camera. Insert
the lens connector into the auto-iris connector on the
camera.
continued on next page
