1
FEATURES:
CHRONOGRAPH
2000 memories
Segregated memory (capability to memorize LAP
times of different races)
User Selectable
LAP/SPLIT
or
LAP/SPEED
display
Average and best lap time display
Automatic release of
LAP
time after 10 seconds to
allow progress monitoring
Data can be printed at operation or selectively by
race later
Data can be uploaded to computer through upload
cable with software (cable and software optional)
TIMER
Dual timers which start one after another for use in
training programs
Can be used as ordinary countdown timer if 2nd timer
is not set
CLOCK
Hour, minute, seconds, month, date, day and alarm
12/24 hour and month/date or date/month display user select able
BATTERY INSTALLATION
In the stopwatch, two types of batteries are used -- 4 pieces of 1.5V AA size
alkaline battery and 1 piece of CR2032 Lithium battery. The AA size alkaline
batteries supply the power for both printer and CPU. The 3V CR2032 battery is for
back up purpose. Printing is not available when only the CR2032 battery is installed.
To replace batteries remove the battery lid as shown in Fig.1. Replace the AA size
alkaline batteries according to the polarities shown on the case. To replace the
CR2032, unscrew the positive metal contact and replace the battery into the
position shown in Fig. 1 with positive side face up. Re-screw the metal contact.
**: Always replace at the same time with all 4 pieces of new AA size high
capacity alkaline batteries.
You do not need to reset the stopwatch if the clock keeps running after changing
of batteries.
If all batteries are dead and the clock is out of order, you need to press the reset
key (Fig. 1) to reset the stopwatch after battery replacement. The stopwatch will
then switch to clock mode automatically. Slide back the battery lid to complete the
battery replacement procedure.
**: Remove all the AA size alkaline batteries if the stopwatch will not be
used for a long time to avoid battery leakage that may damage the stopwatch.
CHRONOGRAPH OPERATION
Press C to go to the
CHRONOGRAPH
mode. The display as shown in Fig. 2.
Press A to start.
3
2
CR2032 POSITIVE
METAL CONTACT
RESET KEY
Fig. 1
Fig. 2
A
B
D
C
