1. Go to the Ultrahaptics Developer Site
http://developer.ultrahaptics.com
.
2. Register the Development Kit and create an account using the serial number displayed on the
control board (see
Control board overview
).
3. Download and install the SDK from the Ultrahaptics Developer Site.
4. Install 'V2 Desktop SDK' for the Leap Motion
®
camera module from
https://www.leapmotion.com
.
5. Run the demos available as part of the standard SDK.
6. Download and install the Sensation Editor tool from the Ultrahaptics Developer Site and start
experimenting with the Ultrahaptics technology!
Register your kit (see
Install the Software Development Kit
) to
access the Ultrahaptics Developer Site for more information and
support tools including:
•
Installation guidelines and tips
•
Tutorials and documentation
•
Frequently asked questions
•
Latest SDK, firmware and Sensation Editor
NOTE: The UHDK5 is designed for evaluation and development purposes and not for use in end user products. Please refer to the
Compliance, Health & Safety, Warranty note for details. Leap Motion and the Leap Motion logo are the trademarks of Leap Motion, Inc.
