PN 30A170 rev Jan2008
22
E. BOILING OUT FRYER:
The fryer should be
BOILED OUT
every
7 DAYS
to remove carbon buildup and other encrusted materi-
als. Add the amount of boil out compound to the fryer as prescribed in the cleaning manual provided by the chemical supplier
and follow instructions for boiling out a fryer in the “General Filtration Procedures” manual (UFS # 30A181).
F. CLOSING / SHUTDOWN INSTRUCTIONS:
1. CLOSING:
When closing at night; filter the shortening in the fryer,
THOROUGHLY
drain all filter lines and cover the fryer
vessel. Turn the
ON/OFF
Switch on the fryer
OFF
and turn the Manual Gas Valve
OFF
.
2. SHUTDOWN OR PROLONGED POWER FAILURE:
a. Shutdown: Perform the following whenever a fryer is being shutdown for an extended period of time:
1) Drain and discard the shortening.
2)
THOROUGHLY
clean the fryer vat.
3) Turn the ON/OFF Switch to the
OFF
position, disconnect the 120-volt power cord and turn applicable Circuit
Breakers
OFF.
4) Turn the Manual Gas Valve
OFF.
b. Prolonged power failure: The gas fryer cannot be operated during power failures.
DO NOT
attempt to bypass safety
controls and manually start the fryer.
Summary of Contents for F-P-30-14
