background image

HYDRAULIC CYLINDER FOR SIDE MOUNT APPLICATIONS 

  

-  

 page 5 

of  23

Installation and Maintenance Manual

INTRODUCTION

This installation and maintenance manual represents an important part of the product and must be available

to  the  people  in  charge  of  its  use  and  maintenance.

The  user  must  know  the  content  of  this  manual.

UFLEX 

USA  declines  all  responsibility  for  possible  mistakes  in  this  manual  due  to  printing  errors.

Apart  from  the  essential  features  of  the  described  product, 

UFLEX 

USA  reserves  the  right  to  make  those

modifications,  such  as  descriptions,  details  and  illustrations,  that  are  considered  to  be  suitable  for  its

improvement, or for design or sales requirements, at any moment and without being obliged to update this

publication.

ALL  RIGHTS  ARE  RESERVED. Publishing  rights,  trademarks,  part  numbers  and  photographs  of 

UFLEX 

USA

products  contained  in  this  manual  are 

UFLEX

 

USA  property.

Great  care  has  been  taken  in  collecting  and  checking  the  documentation  contained  in  this  manual  to
make it as complete and comprehensible as possible. Nothing contained in this manual can be interpreted

as warranty  either expressed or implied  - including, not in a  restricted way, the suitability  warranty for  any

special  purpose.    Nothing  contained  in  this  manual  can  be  interpreted  as  a  modification  or  confirmation  of

the  terms  of  any  purchase  contract.

TECHNICAL ASSISTANCE SERVICE

UFLEX  S.r.l.

Via  Milite  Ignoto,8A

16012 Busalla  (GE)-Italy

Tel:  +39.010.962.0239  (Italy)

Tel:  +39.010.962.0244  (abroad)

Fax:  +39.010.962.0333

Email:  [email protected]

www.uflexgroup.it

North  -  South  -  Central  America:

UFLEX

 USA

6442  Parkland  Drive

Sarasota,  FL  34243

Tel:  +1.941.351.2628

Fax:  +1.941.360.9171

Email:  [email protected]

www.uflexusa.com

To ensure the correct product and component operation, the product must be installed by qualified staff.

In  case  of    part  damage  or  malfunction,  please  contact  the  qualified  staff  or  our  Technical  Assistance

Service.

WARNING

WARRANTY

1.  Two  Year  Limited  Warranty.

 

UFLEX

  USA,  Inc.  warrants  that  all  products  manufactured  by 

UFLEX

  USA,

Inc. or 

ULTRAFLEX

  S.p.A. and sold by 

UFLEX

 USA to the retail purchaser ("Purchaser") that for two (2) years

after  the  date  of  manufacture  to  be  free  from  defects  due  to  material  or  workmanship,  subject  to  the

exclusions  below.  Improper  installation  VOIDS  this  warranty.  Installation  should  only  be  attempted  by  a

trained  and  qualified  technician.

2.  Exclusions.

  This  limited  warranty  does  not  cover  and  does  not  extend  to  any  of  the  following:

(a)

 Failure caused by normal wear and tear, climatic conditions, misuse, neglect, lack of proper maintenance,

accident,  fire  or  other  casualty  damage,  racing,  overloading,  negligence,  modification,  beaching  or

grounding  of  vessel,  collision,  impact,  towing,  acts  of  war  or  hostilities;

(b)

components  not  manufactured  by 

UFLEX

  USA,  Inc.,  or  its  affiliates;

(c)

  cost  of  removal  or  reinstallation  of  any  component  (including  components  manufactured  by 

UFLEX

  USA,

Inc.)  or  disassembly  or  reassembly  of  the  unit  containing  the  component;

(d)

components  not  manufactured  by 

UFLEX

  USA,  Inc.  or 

ULTRAFLEX

    S.p.A.,  whether  or  not  warranted  by  the

other  manufacturer;

(e)

  any  product  which  has  not  been  properly  installed.

Summary of Contents for UC 132-OBS

























Reviews: