Ultraflex T67 Installation And Maintenance Manual Download Page 4

Installation and maintenance manual

ULTRAFLEX

 

page 4 

of 43 - 

 

T67 STEERING SYSTEM

E

N

G

L

ISH

In  this  manual  the  following  symbols  are  used  to  ensure  the  user  safety  and  to  guarantee  the  correct

operation  of  the  product:

MANUAL USE AND SYMBOLS USED

THE INSTALLATION AND MAINTENANCE MANUAL is the document given with the product from its sale to its

replacement  and  discharge.  The  manual  is  an  important  part  of  the  product  itself.

It  is  necessary  to  read  carefully  the  manual,  before  ANY  ACTIVITY  involving  the  product,  handling  and
unloading  included.

STERN

BOW

STARBOARD

PORT

The  symbols  aside  indicate  all  the  operations

which  must  be  carried  out  by  qualified  or  skilled

staff,  in  order  to  avoid  hazards.

DANGER

Immediate  hazards  which  CAUSE  severe  personal  injury  or  death.

WARNING

CAUTION

The  symbol  aside  indicates  all  the  operations  which  must  be  carried  out

by  qualified  or  skilled  staff,  in  order  to  avoid  hazards.

We  recommend  training  the  staff  in  charge  of  the  product  installation

and  checking  their  knowledge.

NOTICE

Important information for the correct installation and for maintenance, that

does not cause any damage.

Denotes that a hazard exists which can result in injury or death if proper

precautions  are  not  taken.

Denotes  a  reminder  of  safety  practices  or  directs  attention  to  unsafe

practices  which could  result  in personal  injury  or damage  to  the craft  or

components  or  to  the  environment.

Summary of Contents for T67
















Reviews: