Installation and maintenance manual
ULTRAFLEX
page 10
of 43 -
T67 STEERING SYSTEM
E
N
G
L
ISH
5
Tighten the bracket (1) to the dashboard using
four screws M6x35 (hexagonal head) (2), four
washers (3) and four self stopping nuts M6 (4) with
torque of 6 Nm (53 lbs in).
6
Insert the helm shaft from the back side of
the dashboard through the hole of the mounting
bracket. The helm can be fixed in 5 different
positions (every 45°).The right position will be
determined by the mounting side of the single
cable. Place the helm in the selected position
and align the holes for mounting. Tighten the helm
to the bracket with four M6 self-locking nuts (5)
with torque of 6 Nm (53 lbs in).
1
2
3
4
5
7
Insert the ring (6) on the helm bezel
considering that the adjusting screw (7) must be
aligned with the mounting bezel hole (8).
8
Insert the mounting bezel (8) and bringing in
contact with the dashboard (9).
Fix the mounting bezel (8) to the dashboard (9)
by means of two self-threading screws (10).
FRICTION ADJUSTMENT
HOLE POSITION
6
7
8
10
9