10
Interlink - User Guide
Interlink - User Guide
1.
Ensure all alarms have batteries fitted and are turned on
2.
Pick one alarm to be the Master unit; mark this alarm for future
reference
3.
On the Master unit, press the test button 3 times in quick
succession
a.
The red light should be on continuously
b.
Master mode will time out in 10 seconds if no other alarms
attempt a connection
4.
On all other alarms, one at a time, press the test button 3 times in
quick succession
a.
If successful the red light on each alarm should flash rapidly
for a short period of time
b.
If not successful try again
5.
Once all other alarms are connected the Master unit can be put
into normal operation
a.
Either wait 10 seconds or press the test button once
