20
•
P,4,6!,12,16
Locating times 4,6,12 and 16. The default locating time is marked with an exclamation mark.
•
GMT+2
Time zone GMT+2.
•
V632
Battery voltage 6,32 V.
•
T21
Temperature 21 °C.
•
G23
Reception signal strength (0-31). The higher the number is the better the signal strength is. 99
means that the signal strength is not known.
•
L3,0
Motion detection information. First number indicates that on how many monitoring periods the
reindeer has not moved. In this case the reindeer has not moved for three hours. The latter number
indicates if the device has sent the “GPS STOP” message (0 = no message has been sent and 1 = the
device has sent the “GPS STOP” message). R-command resets the motion detection information.
•
-PGPS3 U3.0
The device name and firmware version.
•
Snro:1431234
The serial of the device.
5.3.2
K0
To the K0-messages the device replies always to the admin user of the device.
For example,
(1) K0 +3580123456789 snro:1431234
•
(1)
First reply message.
•
K0 +3580123456789
The admin (K0) phone number.
•
snro:1431234
Device serial.
5.3.3
K
To the K-messages the device replies by sending all phone numbers of the device users, excluding the
admin. For example,
(6) K1 +3581234567890 K2 +3582345678901
. To an incorrect command the device
will reply with a letter E in front of the reply. The device will reply to the K-message only to the admin.
•
(6)
Sixth reply message.
•
K1 +3581234567890
User K1 phone number.
•
K2 +3582345678901
User K2 phone number.
5.3.4
SMS, GPRS, GPRS+ and APN
Device will reply to these commands by sending the same command back to the user to let the user know
that the command is received.