•
Keep children and bystanders
away while using this motorcycle wheel chock. Distractions can result in
a loss of control, so bystanders should be kept a safe distance from the work area.
•
Be aware of all power lines, electrical circuits,
water pipes and other mechanical hazards in your
work area, particularly those hazards below the work surface hidden from the operator’s view that may
be unintentionally contacted and may cause personal harm or property damage.
PERSONAL SAFETY
•
Maintain a safe working environment.
Make sure there is adequate surrounding workspace. Do not
use this product in a damp or wet location.
•
Use the correct product for your motorcycle.
Make sure the motorcycle’s wheel fits into the Wheel
Chock prior to first use.
USE AND CARE
•
Use only the accessories that are recommended
by the manufacturer for your model.Accessories
that may be suitable for one tool may create a risk of injury when used on another tool.
•
Never leave a motorcycle
running while unattended.
ASSEMBLY
The Wheel Chock comes fully assembled; however it must be mounted onto a solid surface to secure it. It is
designed to be mounted on the bed of a truck, a motorcycle lift, or a concrete floor.
WARNING:
Do not sit on the motorcycle while it isbeing loaded into the Wheel Chock.
WARNING:
Verify that the installation surface has no hidden wires, brake lines, etc. before drilling.
Concrete Floor Mounting
•
Choose a location that is flat, level and capable of bearing the combined weight of the Wheel Chock
and the motorcycle. Make sure that the location is out of the way and there is sufficient room to remove
the motorcycle after it has been mounted. The mounting surface should be suitable for heavy
equipment.
•
Use the mounting holes in the Base (7) of the Wheel Chock as a template. Arrange the Base (7) in the
chosen location and, using a pencil, mark where the holes are to be drilled. You will need concrete
anchors (not included) to secure the Base (7) to the concrete floor. Using the correct size concrete drill
bit (not included), drill the mounting holes to secure the Base (7). Attach the concrete anchors to the
floor. Secure the Base (7) to the floor utilizing the concrete anchors.
Page of 6
3
