Page 3 of 7
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors that cannot be built
into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY CONSIDERATIONS
•
If mounting this product requires drilling holes, the installer MUST be sure that no
vehicle components or other vital parts could be damaged by the drilling process.
Check both sides of the mounting surface before drilling begins. Also de-burr any
holes and remove any metal shards or remnants. Install grommets into all wire
passage holes.
•
Do not use a pressure washer to clean this product.
WORKLIGHT
USE AND CARE
•
Do not modify the Worklight in any way.
Unauthorized modification may impair the
function and/or safety and could affect the life of the product.
•
Always check damaged or worn out parts before using the Worklight.
Broken
parts will affect the Utility light operation. Replace or repair damaged or worn parts
immediately.
INSTALL THE WORKLIGHT
1. Attach the bracket
（
4
）
& O-ring (8) on the light
（
1
）
using M6 x 25 Hex socket cap screw
（
2
）
. Do not overtighten the screws.(See Figure 1)
Figure1
