Setting 5 - Unlock Pulses
1. Double Unlock 1 Flash/Honk Two 1/8 second Unlock pulses when
UNLOCK is pressed.
*2. 3/4 Unlock 2 Flashes/Honks One 3/4 second Unlock pulse when
UNLOCK is pressed.
1. Turn the ignition key to the “ON” position.
2. Within 10 seconds, press and release the remote transmitter buttons:
UNLOCK, TRUNK, UNLOCK, LOCK.
Setting 6 - Passive Warning Chirp (setting 1 must be ON)
1. Chirp ON 1 Flash/Honk
Warming honks during 30 second arming.
*
2. Chirp OFF 2 Flashes/Honks No warning honks.
1. Turn the ignition key to the “ON” position.
2. Within 10 seconds, press and release the remote transmitter buttons:
LOCK, TRUNK, UNLOCK, TRUNK.
Setting 7 -Reset to Factory Default
To Reset
all programmable features to factory default setting:
1. Turn the ignition key to the “ON” position.
2. Within 10 seconds, press and release the remote transmitter buttons:
TRUNK, LOCK, UNLOCK, TRUNK.
NOTE: Reset to factory default
is confirmed with three horn chirp sounds
and park light flashes.
*(
default setting
)
REMOTE VEHICLE KEYLESS
INSTALL MANUAL
PAGE 7
PROGRAMMING
Setting 4 - Door Lock Pulse
1. 3 Seconds 1 Flash/Honk 3 second LOCK/UNLOCK pulse.
*2. 3/4 Second 2 Flashes/Honks 0.75 second LOCK/UNLOCK pulse
1. Turn the ignition key to the “ON” position.
2. Within 10 seconds, press and release the remote transmitter buttons:
LOCK, UNLOCK, TRUNK, LOCK
.
