OWNER’S MANUAL
REMOTE VEHICLE SECURITY
PAGE 8
Method 1
Press and hold the
LOCK
and
UNLOCK
buttons for three
seconds. The park lights will flash and the siren will three
times.
While the park lights are on, strike the vehicle with the amount of
force wanted to trigger the alarm. Strike the vehicle with the palm of
the hand the same amount of force
three times
, the siren will chirp
each time the system detects impact.
NOTE:
Be careful not to impact the vehicle in a area that may cause
damage. The most common location for testing and setting the shock
sensor is the vehicles A-pillar. The A-Pillar is the metal support that
runs from the roof of the vehicle to the hood area.
Adjusting the shock sensor:
Shock Sensor Programming/ Adjustment
Method 1
Method 2
Exit
To enter shock sensor programming:
To exit shock sensor programming:
Press and release
LOCK
or
UNLOCK.
#
#
#
Method 2
Press and release the
LOCK
button five times (once every
second). The park lights will flash and the siren will three
times.
#
Temporary Shock Sensor Bypass.
Within three seconds press and release the
LOCK
button and then
press and release the button. The system will chirp once when the
LOCK
button is pressed and once when the button is pressed. The
shock sensor will be disabled until the system is disarmed and the
rearmed again.