OWNER’S MANUAL
REMOTE VEHICLE SECURITY
PAGE 10
Emergency Ser vice Mode - (Valet Mode)
Method 1
To Activate Service Mode:
Turn the ignition key to the “On” position then press and hold the
Program
Button located on the antenna for 5 seconds. The system
will chirp the siren
5
times
as confirmation.
To Deactivate Service Mode
:
Turn the ignition key to the “On” position then press and hold the
Program
Button located on the antenna for 5seconds. The system
will chirp the siren
2
times
as confirmation.
Ignition
“On”
#
Method 2
To Activate Service Mode:
Press and release the
#
Button and then press and hold it until the
system chirps the siren
5
times
as confirmation.
To Deactivate Service Mode:
Press and Release the
#
button and then press and hold it until the
system chirps the siren
2
times
as confirmation.
NOTE:
The LEDs will be “ON” solid and the “?” icon on the remote
transmitter will appear when the system is in Service Mode.
This feature will disable the system except for lock, unlock and trunk
functions. This mode is used if a remote is misplaced, damaged or if
the system malfunctions. If the system was installed with a starter
disable this feature will disable the starter disable relay and allow the
vehicle to start.
Activate/ Deactivate Service Mode (Valet Mode)
5 sec.