background image

  

CAR FINDER MODE

SILENT ARM / SILENT DISARM

1  Press and HOLD the Arm/ Lock button for three seconds.
2  
3  The park lights will begin to flash and the siren will activate.
4  To turn off panic, press Lock or Unlock buttons on remote.
5  If no button is pressed, Panic Alarm will sound up to 1 minute then turn off

.

The doors will lock and the Starter Disable will activate. (optional)

Panic Mode

 is a personal protection feature that allows you to activate your alarm from the 

remote transmitter. This feature can be used to draw attention to your vehicle if you feel 
threatened.

- PRESS & HOLD button number 4 on the remote transmitter for 3 seconds the release.
- Siren will chirp 5 times and lights will flash.

This feature helps in locating vehicle in a busy parking lot.  It allows you hear and see your 
vehicle from a distance.

1  Press then release the Lock & Unlock buttons together.
2  If the system is DISARMED, it will Arm and Lock with no siren chirps and 1 light 

flash.

3  If the system is ARMED, it will Disarm and Unlock with no siren chirps and 2 light 

flas

h

.

PRESS & HOLD for 3 sec

PRESS TOGETHER

ACTIVATE PANIC MODE

PRESS HOLD

+

 AUX OUTPUT

The Aux output can be programmed for a variety of custom applications.  It is 
activated by button 3.  Please check with your installation center on use and 
activation for this option.

 PASSIVE ARMING

The Passive Arming feature is used to ensure that the vehicle is not left with the 
alarm disarmed.  

Type-1 

When programmed for Passive Arming (Type-1) the system will 

automatically arm and lock (optional) the doors 30 seconds after the last door is 
closed.

Type-2 

When programmed for Passive Arming with Rearm (Type-2) the system 

will automatically arm and lock (optional) the doors 30 seconds after the unlock 
button is pressed on the remote.

  STARTER DISABLE

Starter Disable is a feature that is designed to help prevent the theft of your 
vehicle. When the alarm is armed the system will interrupt the vehicles starter wire 
thus disabling the vehicle from starting. Disarming the alarm will re-enable the start 
circuit and allow the vehicle to start.

  IGNITION AUTO LOCKS

This optional feature can be programmed to automatically lock the doors when the 
ignition key is turned to the on position then automatically unlock the doors when 
the ignition key is turned to the off position.

 DOME LIGHT SUPERVISION

This feature is designed to turn on the interior or exterior lights of your vehicle 
when the Disarm/Unlock button is pressed. The light circuit will stay active for up to 
30 seconds or until the ignition key is turned to the on position.

SYSTEM PROGRAMMING - 

Menu 1

SYSTEM PROGRAMMING - 

Menu 1

PAGE 8

PAGE 9

450 SERIES

450 SERIES

OWNER'S  MANUAL

OWNER'S MANUAL

TRANSMITTER FUNCTIONS

TRANSMITTER FUNCTIONS

Summary of Contents for 450 SERIES













Reviews: