Ultra Start 450 SERIES Owner'S Manual Download

Page: 7 / 12

DRIVER'S DOOR PRIORITY UNLOCK

ACTIVATE TRUNK RELEASE

1 Press then release the Disarm / Unlock button on the remote transmitter.
2 The park lights will flash and the siren will chirp two times.*
3 The driver's doors will unlock and the Starter Disable will deactivate. (optional)
4 The LEDs will stop flashing.
5 Press the Disarm / Unlock Button a second time within 3 seconds and the other
doors will unlock.

1 Press then HOLD the Disarm / Unlock button on the remote.
2 The park lights will flash and the siren will chirp two times.
3 The doors will unlock and the Starter Disable will deactivate. (optional)
4 The LEDs will stop flashing.
5 - Continue to HOLD until siren chirps again and trunk activates
6 - Release Button

NOTES:

- For safety, the trunk release will not active when ignition key is ON.

DISARM SYSTEM / UNLOCK DOORS

1 Press then release the Disarm / Unlock button on the remote.
2 The park lights will flash and the Siren will chirp Two times.*
3 The doors will unlock and the Starter Disable** will deactivate.
4 The LEDs will stop flashing.

NOTES:

- If the alarm was active (siren sounding), the first press of the unlock button will turn off

the siren and the second press will unlock / disarm.

- Siren will chirp 3 times if alarm was triggered while armed.

See alarm diagnostics

section of manual for further information

If system is programmed for silent disarm, siren will not chirp when disarming, park
lights will flash 2 times.

Contact installer if you do not want this feature.

- If system is in valet mode, siren will not chirp and park lights will not flash but doors will

unlock. LED will be one SOLID.

See Valet / Service Mode section of manual for

further information.

** Optional Feature may require additional parts

PRESS & RELEASE

PRESS TWICE

PRESS & HOLD

1 Press and release the Arm/ Lock button on the remote transmitter.
2 The park lights will flash and the siren/ horn will chirp one time.
3 The doors will lock and the Starter Disable will activate. (optional)
4 The LED will start flashing within five seconds.
5 Once Armed, the alarm can be triggered by the shock sensor (impact to

vehicle), door inputs (opening door / hood), turning on ignition.

NOTES:

- If a door is open or delay dome light is 30 seconds after arming, system with chirp 3

times to indicate door input is bypassed until door is closed or dome light turns off.

- If system is programmed for silent arming, siren will not chirp when arming, but park

lights will still flash.

- If system is in valet mode, doors will lock, but siren will not chirp and lights will not flash.

LED indicator will be on solid.

See Valet / Service Mode in this manual for further information

ARM SYSTEM / LOCK DOORS

PRESS & RELEASE

SYSTEM PROGRAMMING -